How To Choosing the Stainless Steel Products
Stainless steel products are without doubt very high quality and they have resistant features that make them excellent in various applications. However, this is a material that comes in numerous grades and it can be confusing if you know nothing about the material. A few basics can help you make the right selection every time you are out looking for stainless products for your application. This is a factor that you must consider if at all you are to get the best grade for the products you are about to purchase.
The environment on which you will be installing the products should help you select the best grade because chemical concentrations like chloride and atmospheric conditions can interfere with the quality of the product. General purpose austenitic stainless steel grade is okay for low corrosive areas, but you definitely need higher grades in areas that are highly corrosive and have high acidic content.
Generally stainless steel is heat resistant, but the levels can vary from one grade to another. Furnace temperatures can for instant accelerate the corrosion rates and end up exerting more pressure to your stainless steel products. You might require higher grade that is designed to withstand the high heat. This is another very important factor to consider when choosing stainless steel products.
Austenitic grades come with lower responses and grades such as 310 and 316 have non-magnetic features in all conditions because their magnetic permeability is relative compared to 2101 and 2205 grades that have higher permeability. This is a factor that you cannot forget depending on the demands of your application. The environment and purpose of the product is what should guide you to the best grade of stainless steel and even though this can be confusing for many, a professional can help you make the right decision.
Martensitic, duplex and austenitic stainless steels are high strength, but they might not be the best choices for steel works achieved by steel hardening such as welding. The best you can do is to know the demands in the environment you will be using the products on and then make the strength decision. Tubular, sheet and bar stainless steel products demand for different stainless steel grades.
Not all grades apply to the different sizes and forms but this would usually be something you do not need to worry about because your manufacturer will take care of it for you. If you know a little about the grades, then it would be wise to just confirm the grade that has been used for the product forms you are purchasing so that you are sure it is the right grade fitting your needs.
When looking at the cost of your stainless products, it is best that you value it according to the quality you are getting. Higher grades of stainless steel tend to be higher in life and cost for that matter so be sure that you get your facts right, so you are able to get the best high quality products at fair prices.